 |
|
PCTechBytes Computer Repair Help Tutorials |
PC Help Guides |
Knowledge Base Home | Glossary |
|
Home > All Categories
> Networking Tutorials > Home Network Setup |
Home Network Setup |
|
Home Network Setup
When
setting up a network, you should think about the future before buying
the hardware. This can save you money in the long run. If you know
later on that you'll want to add wireless capabilities to your LAN,
then you should invest in a wireless router to begin with and build
your network outward from there. Other networking devices you'll need
include a broadband modem (DSL or Cable) and wireless or Ethernet
network cards--depending on what type of network you're setting up.
This
diagram shows a typical home network with a couple of PCs, a printer
and a wireless connection to a laptop. You'll notice that the modem
gives the router an external IP address, while the router's internal
ports allow the client PCs to have internal IP addresses like
192.168.1.2. The gateway for the PCs is the router's internal IP
address 192.168.1.1. Gateway means this is the IP address the PCs will
use to gain access to the Internet. The router also allows the
computers to see each other.
Configuring The Network
It's
usally best to allow the router to give out IP address for the LAN. In
this case the router is considered a DHCP server. By default, computer
network adapters are set to Obtain An IP Address Automatically, which
means when it boots it will look for a DHCP server and the router will
assign it a local IP address.
In
the router's configuration, you will want to change the default
password and the SSID for the router. You will also want to enable WPA
encryption for any wireless devices you have. This makes it harder for
a passer-by or a neighbor to accidently gain access to your network.
Unless
the printer has a print server built in, it will need to be attached to
a PC and that PC will become the print server for the network. So if
you're planning on setting it up this way, you'll want to make sure you
install the printer on a machine that is always left on.
This
is the basic, bare-bones explanation of a home network setup. If you
need help configuring any of these devices, join our forum and post
your question.
| |
|
| Authored by: David
This question has been viewed 8405 times so far.
|
|
Click Here to View all the questions in Networking Tutorials
category. |
File Attachments |
| There are no attachment file(s) related to this question. |
| |
|
|
|
Related Questions |
- 169 IP Address
- Update Your D-Link Router Firmware
- Configure Static IP Address
- Renew Your IP Address
- Router Setup and Configuration
- Wireless Zero Configuration
- Windows Remote Desktop Setup
- Setting Up A VPN Remote Connection
- LAN Party Setup
- WiFi Security
- Internet Connection Sharing
- Firewall Options
- Wireless Network Setup
- Configure WPA Wireless Connection
- Is VoIP Internet Phone For Me?
- Wireless Network Standards
- RJ45 Network Interface Cards
|
|
|
|
Disclaimer: PCTechBytes, LLC is not responsible for the damage of your PC or any harm that may come to you or your property as a result of information contained on this site. Computer repair should be performed by a professional service rep only. Working on your own computer could result in a voided warranty, loss of use or permanent destruction of data. |
| |
| Copyright 2008 PCTechBytes, LLC |
|