PC Troubleshooting Tips “I Didn't Do It!” We've all heard it before. Whether you're a help desk technician, a system administrator, or just the whiz kid nephew that the whole family calls for PC help, you're familiar with this response. Dealing with computer problems can be frustrating enough, even without having to start from scratch due to a user who can't tell you what went wrong. This is why it's vital to have a game plan when diagnosing a sick PC. The intention of this article is to walk you through the logical troubleshooting process.

Article by Joe Chafin Step 1: Re-Create The Problem Ask the user to demonstrate the problem. This is an important step, because sometimes the problem lies not with the hardware but with the user. By actually having the client show you what is happening, you can garner much more information than by assuming the client is correct in his or her diagnosis. For example, a user is complaining that his “sound card doesn't work,” when in fact the power adapter is unplugged from the speakers. Step 2: Determine If The Problem Is Hardware Or Software (or, gasp, both!) Determining if the problem lies in hardware can sometimes be accomplished by using some basic senses. Listen for POST beeps, bad cooling fans, or the infamous click-click-click of a bad hard drive. Smell for burning parts. Watch the computer POST and look for error codes. Software problems usually occur more along the lines of crashes, system hangs, error messages, and the like. Step 3: Divide and Conquer Isolate the problem by dividing it into logical areas . For example, if the computer produces an error when reading from a DVD, the logical place to look is the DVD drive system. This system consists of the DVD disc, the drive itself, the components that tell the drive what to do, the cable that connects the drive to the motherboard, and the software being used to read the disc. Any of these can cause an error. Your task is to determine where the problem lies. Test and rule out each part of the system until you find the faulty link in the chain. Step 4: Fix The Problem Or Test A Different Theory Once the problem has been isolated, repair can begin. Swap the part, change settings, update software, etc. If your solution doesn't work, start the troubleshooting process over again at the appropriate step. Be sure to take notes. This step can be frustrating, but logic will eventually prevail. Step 5: Test The Solution Don't immediately assume that you have totally repaired the PC. Occasionally, fixing one problem can cause or reveal others. Test the computer yourself and then have the user test it, under normal operating conditions, to prove that the problem has been solved. Step 6: Provide Feedback To The User This is often the most overlooked step of the troubleshooting process. I have seen many technicians who fail terribly at this juncture due to lack of patience, extensive use of technical terms, or just plain being condescending. If a user is paying you to work on an issue, they have a right to know exactly what went wrong and how it was fixed. Explain the problem and the solution to your client, without using overly technical terms. Don't assume that your client is less than intelligent just because they don't share your passion for technology. Remember, your technical prowess may get you the job, but your people skills will ensure that you keep it.

1. PC Will Not Boot
2. Device Manager Error Codes
3. Power Supply Troubleshooting
4. Computer Troubleshooting Tips
5. DVD Drive Troubleshooting
6. Hard Drive Troubleshooting
7. Benchtest Your PC
8. Power Supply Troubleshooting
9. Lost Clusters On Hard Drive
10. Bypassing The Case Switch
11. No Fixed Disk Present
12. Top Ways to Break Your PC
13. Diagnose Computer Problems
14. CPU Beep Code
15. Invalid Boot.ini or Hal.dll error
16. My Computer Automatically Reboots